Basic Editing Features in RpTools
The basic functions of RpTools make it easy to perform edits on components, or any set of selected items, using Wizards to enter precise dimensions and Arrow Icons to specify the direction or orientation o fthe edit.
Move Wizard for RpTools .
The Move Wizard is useful for more exact positioning.
In this example, we want to move an component exactly 3' along the red axis.
- Select a Component or geometry to place.
- Click the Move icon on the RpTools toolbar.
- Type in a distance desired (or use the up and down sliders)
- Click an arrow for the direction to move.
(The arrows are colored to match the red, green and blue axes.)
(The angular arrows move the total distance at 45 degrees. If you want to move in two directions, move along one axis, then enter the other distance and move along the other axis.)
ready to move selected object
Object moved 3' along Red axis
Enter the distance to move below, and click an arrow to move in that direction.
If you make a mistake, you can clock the opposite arrow to return, or use Undo.
Use component axes - This is enabled only if a single component instance is selected. If it is checked, the component will be moved along its own axes. (For example if it has been rotated.). Otherwise the selection is moved along the model axes. (Red = X, Green = Y, Blue = Z.)
Copy Wizard for RpTools
Make a copy of a component 3' along the red axis
Copy Selection works like Move Selection, except that a new copy of the selected items is created, rather than just moving the items.
- Select Component or geometry to copy.
- Load RpTools Copy Wizard from Toolbar
- Enter the distance to copy
- Click te arrow in the direction you want to copy,
Enter the distance to move when making the copy below, and click an arrow to copy in that direction.
If you make a mistake use Undo.
After the copy, the new entities are selected. If you click an arrow (again), a new copy will be made in that direction.
Use component axes - This is enabled only if a single component instance is selected. If it is checked, the component will be copied along its own axes. (For example if it has been rotated.). Otherwise the selection is moved along the model axes. (Red = X, Green = Y, Blue = Z.)
Mirror Wizard for RpTools
Mirror works like Copy, except that the geometry is mirrored around an axis.
Note:Mirroring is only in the Red.Green plane not in the Blue Axis. (Useful for mirroring "handed" furniture components.)
- Select Component or geometry to mirror
- Click the Mirror icon on the RpTools toolbar
- Enter a gap to leave between objects after mirroring.
- Click the arrow for the direction of the desired mirror.
Ready to mirror "right hand" desk.
Desk Mirrored along Red Axis with a 2' gap.
Quickly mirror components, etc. with the Mirror Wizard. Red and Green mirror operations are reflected through a plane perpendicular to the ground plane (red/green). Blue mirror operations are reflected through a plane parallel to the ground plane.
Click any of the colored arrows to mirror the current selection in along the corresponding red, green or blue axis.
Gap is the distance which will be placed between the selection entities and the mirrored entities. This can be used to mirror furniture in a room or workstation across a hall or aisle.
Rotate Wizard for RpTools .
- Select Component or geometry to Rotate
- Click the Rotate icon on the RpTools toolbar
- Use the Rotate By settings in the lower half of the menu select or enter desired rotation.
- Select an arrow for the axis to Rotate about.
(Solid Blue rotates clockwise around the blue axis.)
Use Component Axes - If the selection is a single component, this option will rotate the selection about its original axes, rather then the model axes.
Ready to rotate selected item
After rotation of item
Enter an angle to rotate by. The radio buttons will prefill some common angles. If you set a small angle such as 15 or 30 degrees, then you can click the arrow several times to get a larger rotation.
Click an arrow to rotate around an axis. To spin an item placed on the floow, use the positive or negative Z arrows.
Stretch Wizard for RpTools
There are 3 tabs available for stretching.
- Shows the current size of the component or entities selected.
- Enter the desired size in any of the directions and click Apply to perform the stretch.
- You can also return to this tab after performing a percentage or incremental stretch to see what the new dimensions are.
- Enter a percentage and click an arrow to stretch the component, or selected entities, along an axis. Click an arrow to stretch in that direction.
- If you want to stretch in all 2 or more directions at the same time, check the Lock dimensions in these axes check boxes. You must check 2 or 3 axis boxes for locking to occur.
- Enter a distance to increase the selection by. Click an arrow to stretch in that direction.
Tutorial for Incremental Stretch
- Select the Component or geometry to stretch.
- Click the Stretch Icon on the RpTools Toolbar.
- Select the Stretch type desired - New Dimensions, Percentage, or Incremental Add-on
- Click one of the colored arrows to shrink or expand the component along that axis.
Object ready to stretch
(Since this is a Dynamic Component, more rungs were added to the back.