Tagged 'MCG'

MCG Magnetic Filaments + DCP Van Gogh

Submitted by vusta on Fri, 2016-11-25 22:35

Extract DCP to: C:\Users\xxx\AppData\Local\Autodesk\3dsMax\2017 - 64bit\ENU\en-US\plugcfg\DataChannelPreset

After MCG installation, Filaments can be found in Create>Geo>Vu

Added MCG Magnets Advanced: going where DCM couldn't...(if you got my zip file from OneDrive previously, please get latest from here now...it now has Offset so you can get the Swirl effect)

MCG Mesh Contours

Submitted by vusta on Tue, 2017-06-13 17:13

What's there to say really...

Installation for Max 2016/17: (2018 can be just drag+drop)

https://knowledge.autodesk.com/support/3ds-max/learn-explore/caas/CloudH...

Then can be found in Create>Shapes>Vu.

HyperClone

Submitted by Atelier Bump on Sat, 2015-05-09 12:31

14 comments

MCG Spiderwebs

Submitted by vusta on Sat, 2016-01-09 22:07

Creates simple spiderwebs with splines. Found in Create Panel>Shape>Vu

ver 1.01: added options to weaving.

Ver 1.02: Added gravity control for Spans

MCG IBreakaYouFace

Submitted by vusta on Mon, 2016-08-22 01:36

Various FX on your face....of a 3D geo that is...

Free for Non-commercial use.

ver 1.01: fixed bug so that now all sides of a box (specifically +/-X) rotate about the edge correctly

MCG PerVertInfo

Submitted by vusta on Mon, 2016-04-25 02:19

This MCG displays your Mesh Vertex ID and positional info. There are 3 coord modes, World Origin, Local (Mesh Pivot) and Custom Origin. For dense mesh , you can isolate Region of Interest to display only a selection of verts.

Installation: Scripting, Install Max Creation Graph...

You can use a free version for Vert ID here:
http://www.scriptspot.com/3ds-max/mcg/mcg-vertid

Wavy pattern

Submitted by Maxis on Fri, 2017-08-18 09:59

Tool for creating patterned grids
Wavy pattern

VA CloneOnCurve

Submitted by Alaa alnahlawi on Mon, 2015-12-14 13:31

An extended version of the (AClone on curve) modifier that ships with 3ds max, this one adds the ability to read multiple curves per shape and distribute the clones based on the size of the mesh.

Update 1.1:

The new update brings the ability to control the number of clones incrementally, and if you edited the first point in your shape you can control were the clones start to appear of finish.

Regards

MCG MorphToUV

Submitted by vusta on Wed, 2015-10-21 20:06

This MCG will morph your geometry to UV, much like in ZBrush. Please note this is a morpher not an unwrapper. You'll notice in the video that after I applied the mcg, the geo appears faceted. This is the 'ways' of MCGs, it breaks up the verts/normals. I didn't put an mcg Weld in there coz it's a bit slow and crash prone with high res geos. A Welder modifier is also slow. So the best solution I've found is to simply add an Edit Poly on top, select all verts and weld with a very small threshold, say 0.01, then also set your smooth groups here.

MCG Stitches

Submitted by vusta on Tue, 2015-12-29 21:34

I've decided to make this MCG available for FREE. If you appreciate my effort, you can buy my SweepDreams which works in full 3D here:

https://gumroad.com/candyshop

Create stitches along a path (multicurves supported). You are welcome to use the free variant Path Constraint but this has a few more controls.

ver 1.01: added Double Stitch option

About this site

Tagged 'MCG'